How to enable Samsung air conditioner for heating

How to turn on hot air on Samsung air conditioner?

Air conditioning has long been an integral appliance to create comfortable room conditions. It is with his help people saved in the hottest summer days. But a very small number of users know that this device can be used effectively and in winter. How to set up air conditioning to heat if in winter it becomes too cold?

Operating temperatures

Most split systems have similar operational characteristics. Almost all similar devices function normally if the temperature is not higher than 25 degrees above zero and not lower than 5 degrees below zero. In case the temperature is below the minimum threshold, then the oil that is used for lubricant freezes, and the air conditioner ceases to work and can even break. If the temperature is higher than the maximum value of 25 degrees, then the system is in danger of overheating, which can also disable it. It is important to consider these threshold values ​​when operating the device, you should also understand the principle of operation of the air conditioner.

Turning on the heating

Before setting the air conditioner to heating mode, you need to make sure that its operating temperature is within the working range, otherwise the system may fail. Undoubtedly, different manufacturing companies (for example, LG, Samsung or General) produce largely different models, but still there is a certain universal model for turning on heating:

  • It is necessary to turn on the device (power button, signed as “On”).
  • Next, press the “Heat” button, which means “warmth”.
  • If this button is not present, there may be other options: “Mode”, or any other buttons, under / above which icons such as “sun”, “drop”, “fan”, “snow” are drawn. If none of these buttons is present, it means that the system is not capable of heating.
  • If the “Mode” button is present, you need to press it several times until the “sun” or the signature “Heat” is displayed.
  • Use the switch arrows or the “/-” buttons to set the desired temperature.

After all this procedure, the fan will turn on, and after five (maximum ten) minutes, warm air is formed, heated to a temperature pre-set by the user. Some models of remotes may be configured differently. before setting up, it is recommended to read the instructions.

It is not always necessary to use the remote control to turn on the air conditioner for heating mode. Any split system has an external panel (sometimes hidden by a protective screen), the buttons of which duplicate the keys of the remote control. This is made for situations where the remote control is lost, broken or located far away. Using the panel, you can set the system to heating mode in the same way.

What to do if the heating does not turn on?

There are two main options: either the setting was made incorrectly, or there is a breakdown in the device itself. It is recommended to turn off the air conditioner and repeat all the steps again. If after ten minutes there is no heat from the device, there is a breakdown. The most common malfunction is the lack of freon necessary for the functioning of the heating system. In this situation, it is necessary to take the air conditioner for repair, or call qualified specialists home, especially if the device is under warranty.

In addition, it is possible that the air conditioner is turned on at temperatures that are incompatible with its normal operation. It should be noted that some manufacturing companies produce additional modifications that expand the operating temperature range from.30 to 30 degrees Celsius.

Advantages and disadvantages of heating mode

Modern air conditioners perfectly heat any room. The heated air conditioner has a high efficiency (stands for “efficiency”, which allows you to create comfortable conditions in an apartment or house. However, it is not recommended to neglect the services of central heating.

The constant operation of the system is relatively harmful to the body, since heated air masses during prolonged circulation in a closed room harm the natural processes of thermoregulation, which can affect immunity.

A tip that will come in handy for everyone: how to get rid of an unpleasant smell in the air conditioner.

-instructions for turning on the air conditioner for heating mode

Recall that the air conditioner has a lot of modes (not only heating).

This video explains in detail and shows the method by which you can turn on the heating function on the air conditioner. The user, using his own example, describes in detail all the actions using the remote control, as well as the reaction of the system itself to turning on and changing certain parameters related to the heating mode (sound signals, visual. turning on the lights).

Gree air conditioning: instructions for the console, characteristics, reviews

The key to your comfortable life in the hot season will be a competent selection of split system. If climatic equipment suddenly fails, it can turn into serious cost. Such problems can be avoided if you correctly select parameters, carry out installation and timely maintenance, complying with the rules of operation.

Choosing a cheap model of air conditioner, you may encounter difficulties in the process of using it. This is due to the fact that maintenance and repair costs may exceed the cost of an expensive model. In the modern market of relevant equipment, you can find different air conditioners. Not the easiest question is the selection of a particular device. In brands it is easy to get confused. Some consumers simply do not know where to start.

Experts advise choosing climate equipment taking into account the area of ​​\u200b\u200bthe room and the required power. The last parameter is always calculated individually. It is also called cooling capacity and is determined taking into account the total power of heat sources, among them it is worth highlighting:

Among other market offers, Gree air conditioners should be highlighted, the instructions for the remote control of which are supplied with the device. You can learn some rules of use if you read the article.

Characteristics of the model GKH 42 K3BI/GUHN 42 NM3AO

This cassette air conditioner costs 93335. It is a device with a self-diagnostic system that greatly simplifies operation. For ease of maintenance, the manufacturer has provided an on and off timer that can be programmed 24 hours in advance. The air conditioner is used not only for cooling, but also for space heating, as well as air dehumidification.

The design provides for the presence of an auto-restart option, which allows the resumption of equipment operation in the previous mode if a power failure occurs. This Gree air conditioner, the characteristics of which will be presented below, can be installed on an area up to 120 m2. The permissible outdoor temperature is between 16 and 43 °C. The minimum noise level for the indoor unit is 48 dB. As for the outdoor unit, it can operate with noise up to 62 dB.

This system is ceiling mounted. The maximum heating power reaches 14 kW. Power consumption during cooling. 4.9 kW. You may be interested in the overall dimensions of the panel, they are equal to 950x60x950 mm. As for the indoor unit, its parameters are 840x320x840 mm. The outdoor unit weighs 95 kg. When connecting, you will need the diameter of the refrigerant pipes, it is 3/4 inch. The maximum length of communications reaches 50 m. The panel weighs 6.5 kg.

When considering Gree air conditioners, you should pay attention to the maximum air flow. In the case of this model, this parameter is 27.5 m3 / min. Power consumption during heating. 4.8 kW. Cooling power. 12 kW.

See also  How to make selfie palm on Samsung

Includes fan speed control. It is important to observe the outdoor temperature when heating. The maximum allowable limit is 24 °C. Whereas the minimum is:.7°C.

Before you buy a Grii air conditioner, you should pay attention to the fact that it does not have inverter technology.

When consumers consider a particular option for room conditioning equipment, they pay attention to customer reviews. Among others, opinions should be highlighted that indicate that the described model:

  • safe;
  • can work on a timer;
  • has several modes of operation;
  • has an automatic mode;
  • enables automatic restart after power failure.

As for safety, this model runs on an ozone-friendly refrigerant, which is an extremely important factor for many consumers. You should also pay attention to the fact that the device is able to work on a timer. Using this function, you can program it to turn on and off at a certain period of time.

Not to mention the automatic defrost function, which is very popular with consumers. In addition, the package includes a wired remote control, which greatly simplifies the operation of the device.

Uniform distribution of air throughout the room is guaranteed by the presence of an air distribution damper that operates in automatic swing. The fan can operate at one of three speeds.

enable, samsung, conditioner, heating

You can not worry that in the event of a breakdown you will not understand its causes, because the manufacturer has equipped the equipment with an error indication system.

Characteristics of the model GKH 24 K3BI/GUHN 24 NK3AO

If you are wondering how much an air conditioner costs in an apartment, then you can consider GKH 24 K3BI/GUHN. Its cost is 64323 The equipment is a cassette split system that can be used for cooling and heating rooms. The total area of ​​the latter reaches 70 m2. The unit has a dehumidification function.

In order to operate the device conveniently, the manufacturer equipped it with an on and off timer. Like the above model, this one has a self-diagnostic function, which simplifies system maintenance. It is also convenient that the manufacturer supplemented the Gree air conditioner with a remote control. If there is a power failure, the settings will be restored automatically.

As for the main characteristics, you should pay attention to the minimum noise level of the indoor and outdoor units. These parameters are 43 and 59 dB, respectively.

To ensure that the system does not fail due to improper operation, it must be used at an acceptable outdoor temperature for cooling and heating. In the first case, the minimum and maximum limits range from 16 to 43 °C, respectively.

As for the temperature during heating, its external level can be equal to the limit from.7 to 24 °C.

Additional features of the model

The design provides for air dehumidification mode. You can install the system on the ceiling. The power of the unit during heating reaches 7.7 kW. Power consumption in cooling. 32.4 kW. Panel overall dimensions are 950x60x950 mm. The indoor unit is limited to the following parameters: 840x260x840 mm. The diameter of the refrigerant pipes you may need when installing the system is 5/8″.

Air conditioning control panel: Description and principle of operation

The remote control is used to remotely switch the operating modes of the air conditioner. It is almost indispensable in the daily use of cooling equipment, also because of its location. Split systems are hung on the wall at a height of more than two meters, so even if they have buttons for control, it is always extremely inconvenient to do this.

The air conditioner remote control supplied with it can be of two types. The wireless one is usually attached to a special storage that can be glued to the wall or furniture, and can be used from anywhere in the room, while the wall-mounted one is wired to the air conditioner itself and mounted in a box in the wall, similar to a switch. The first option is much more popular. Almost 90% of residential and industrial split systems have a wireless air conditioner control, and wall control is usually implemented as an additional option.

Details of the operation of each of the controls are usually written in the instructions for use of the air conditioner remote control. It also indicates how to start the air conditioner without a remote control as a last resort. this is relevant if your batteries are dead or the wireless remote control is lost.

Symbols and buttons on the remote control

Unification of designations and technologies is one of the best achievements of manufacturers of any electronics. The meaning of the buttons on the air conditioner remote control is the same or very similar for almost all manufacturers, ranging from well-known manufacturers Mitsubishi or LG to Chinese fly-by-night companies that produce almost any electronics under their own brand.

It is easy to figure out what this or that key means on the remote control. all the designations are intuitive, and the mode switching buttons are usually signed. Therefore, it does not matter whether your remote control is large or small, whether it has a display or all changes are visible only on the air conditioner itself. Almost every remote control has buttons:

  • mode selection, which switches the air conditioner between cooling, heating, blowing and other options;
  • setting the power of the fan, which determines the strength of the air flow that the split system produces
  • adjusting the position of the damper that directs the air flow in a certain direction (usually there are at least 4 modes: moving, up, down, in the middle);
  • temperature switching.

In more detail, all the designations on the air conditioner remote control are shown in the picture below. there are both “mandatory” buttons and most of the optional ones that are in almost every advanced split system.

Button designations on a standard Samsung air conditioner remote control

Setting up the air conditioner with the remote control

Even a child can figure out how to turn on the air conditioner with the remote control. the standard set of functions is intuitive. You can learn more about specific operating modes in the instructions for your equipment, but cooling or heating operation will be configured in exactly the same way on any air conditioners.

The basic mode of operation of the split system is for cooling in the summer. In order to set up the operation for cold, on the air conditioner remote control you need to select the appropriate mode (cooling) and set the temperature. It should be noted that a large temperature difference between the air conditioner and the street is unacceptable. Doctors advise not to exceed a run of 10-12 degrees, otherwise, if you spend a lot of time in the room, there is a risk of getting sick.

The temperature on the remote control is the level to which the air conditioner will try to cool the air in the entire room. You should not set 18-20 degrees in 40-degree heat. firstly, the room will not cool faster, as many people think, and secondly, due to the drafts that occur when the fan is constantly running at maximum speed, you will easily catch a cold.

In the cold season, many turn on the heating on the air conditioner on the remote control in order to make the air in the room not so cool. The problem is especially relevant before the central heating is turned on and after it is turned off. these days the temperature outside can be quite low. It is advisable to figure out how to set up the air conditioner for heat and what restrictions can be in advance. otherwise, during frosts, you can easily ruin the system.

In order for the air conditioner to produce warm air, you need:

  • switch it to heating mode (Mode button on many remote controls);
  • set the desired temperature. you should not set 25-28 degrees to heat the room faster, you can limit yourself to comfortable 20-22 ° C;
  • adjust damper operation.

There are certain restrictions and features here. You can turn on the air conditioner for heating on the remote control, but do not observe warm air for a long time. the split system starts up for several minutes, because it needs to start freon circulation in the opposite direction. In this case, you just need to wait. after 5-10 minutes the room will start to warm up.

Another problem is when the heat is set on the air conditioner remote control, but periodically the system produces cold air. This is a feature of the operation of cooling equipment, which not only heats the room, but also prevents the compressor in the outdoor unit from icing and periodically warms it up.

Features of the remote controls of various brands

Each manufacturer has its own features of the air conditioner remote control. This is especially popular among leading brands producing split systems for household and commercial use. details we consider only a few companies.

See also  How to make sound on a computer louder
Everything is intuitive. all the designations are available on the built-in display, the air conditioner is turned on with a separate button, the fan operation mode and the flap is adjusted by separate buttons. You can adjust the temperature with a “swing”. Selected blocks highlighted the settings of the modes (their switching, “sleep mode”, turbo or quiet operation) and built-in hours with a timer. Error codes are also displayed on the console in service mode.
The consoles in the Korean air conditioners are very similar to the solutions from Daikin. For one exception. the “swings” here also exhibited the temperature. Depending on the model, the number of available additional modes and the size of the screen, which displays all current settings and battery level, differ.

Advantages of the air conditioner in heating mode

The principle of operation of a conventional heater is based on the conversion of electrical energy into heat. Compared with it, the air conditioner has the following advantages:

When the system is cooling, it transfers heat from the room to the outside. If you set the air conditioner to warm air, it will work in reverse mode: transfer heat from the street to the room, while cooling the outside air. Energy savings occur due to the fact that the air conditioner consumes it only for the operation of the fan and compressor, which transfer heat into the room.

Inverter devices with adjustable power are the most efficient. When the temperature is set at the selected indicator, such a system does not turn off, but operates in a minimum mode and maintains heat at a given level.

To transport heat in the air conditioner, special substances are used. refrigerants. Contact with air is carried out through heat exchangers. It happens like this:

  • the refrigerant absorbs heat from the outdoor air through a heat exchanger;
  • the compressor device pumps it to another heat exchanger;
  • the refrigerant transfers heat into the room.

enable, samsung, conditioner, heating

Can the air conditioner be used for heating in winter?

Block: 2/6 | Number of characters: 1528

conventional air conditioners

By “normal” we mean those models whose manufacturers have not explicitly indicated the possibility of heating. Such models are limited by a minimum outdoor temperature of.5 degrees. How to turn on the air conditioner for heating, LG, for example? It is enough to set the outlet temperature higher than outside.

It should be borne in mind that for conventional models, air heating is an incorrect task, resulting in accelerated equipment wear. It is not recommended to practice heating with such an air conditioner for a long time.

Many models, fortunately, have a special mode that allows you to change the order of operation of the air conditioner so that the heating of the air does not cause malfunctions. This applies to models with a heat pump, which we will consider in more detail.

For everyone who is thinking about how to turn on the air conditioner for heating, LG took care of adding the “Heat” button to the remote control (heating). By pressing it, you transfer the device to a special mode of operation, in which the air will be heated.

This mode can operate at outdoor temperatures up to.25, which allows you to use it even in winter.

Operation of the air conditioner for heating in winter

Most split systems operate for heating at a temperature.5…25 °С. If the indicators are lower or higher, performance is lost. In winter, air conditioners should not work. This is due to the fact that the oil dissolved in the refrigerant performs its function of lubricating the compressor parts only in this temperature range. Therefore, use equipment at lower temperatures is prohibited.

Despite this, some companies argue that air conditioners can heat the room even during harsh frosts, and for this you need to install the winter starter. Such statements do not correspond to reality.

Low-temperature set is three devices. Heating the compressor crankcase warms the caution oil and does not give it to thicken. Electric cable heater is installed inside the outer part of the drainage pipeline, preventing the appearance of an ice cork. The moderator of the speed of rotation of the outer unit is a controller that does not allow the hypothermation and frosting of the capacitor. These devices help expand operating temperature range only to use air conditioning in air cooling mode.

Attention! Operation of the device at lower temperatures, as indicated by the manufacturer’s instruction manual, leads to premature failure of the device. Only some air conditioners are able to heat the room at outside temperature.15 °C. These include inverter devices Daikin, Mitsubishi Electric.

Inverter air conditioners are power-controlled systems. This means that when the user-defined air temperature is reached, the mechanism does not turn off and continues to work. But he does it at reduced power and constantly maintains the set parameters. Inverter extends service life by at least 30%. This is due to the fact that starting loads are reduced. In addition, it is possible to achieve energy savings.

Air conditioner settings: operating modes, description of functions

Thanks to modern technology, we can use such a device as an air conditioner. After the acquisition, the owner faces the task of setting up the air conditioner.

Since a competent setting will help get rid of the cold or sultry heat. How to properly organize the operation of this device will be described in the article.

Basic settings

If installation and maintenance is best done only by qualified specialists, then the usual setting of convenient parameters can be done independently. To do this, it is worth studying the provisions discussed in the article.

There are two basic rules, following which you can master the heating and cooling functions. These include:

  • No big contrast between temperatures. Do not create a strong temperature difference between the room and the street. If you go out of a cool room into a street where there is a terrible heat, there will be a detrimental effect on health;
  • Economy while creating comfort. Most air conditioners are equipped with a special mode that saves energy by not allowing you to use an increased amount of electricity.

Each mode is configured individually, which allows you to adjust the device just for you. This brings the air conditioner to the optimal mode, the rational use of all possibilities. You can create custom settings yourself.

Important Features

Modern models perform a large number of functions, in addition to standard heating and cooling. To properly configure the system, you must first deal with all the possibilities, or rather with the modes of the air conditioner.

Such a mode of operation of the air conditioner as cooling is the main function of the air conditioner, since most users buy it for this very purpose. You can set the optimum temperature with the remote control (cool button or snowflake pattern).

How to turn on the air conditioner for heat? The heating function allows you to increase the temperature in the room. In the cold season, when the heating in the room does not give the desired effect, the air conditioner with the function of heating the air (“hot” or pattern in the form of the sun) comes in handy.

Reducing air humidity. Helps to get rid of excess moisture in the room. Usually indicated by a “dry” button or teardrop pattern. Maintaining the required humidity is very important, since the rate of reproduction and spread of harmful bacteria depends on the amount of water in the air.

Air cleaning. Dust, dirt and other substances can enter the premises, which make the air heavier and make it difficult to breathe. Conditioner circulates and cleans.

Has the name on the remote control “fan” or a pattern in the form of a fan.

Autonomous mode saves energy and creates acceptable conditions for a person. You can set this mode only after setting the previously listed.

Features of the cooling mode

As already mentioned, you can not create a strong contrast between the temperature in the room and on the street. Most devices can create up to 16 degrees. But experts are of the opinion that the difference between temperatures should not exceed 5 degrees (for example, if it is 30 degrees outside, then the temperature in the house should be at least 25 degrees). This will avoid many health problems. Severe problems with the cardiovascular system may occur.

It is also important to know that if the environment is about 15 degrees, then the use of cooling is strictly prohibited. This will adversely affect the device itself and the well-being of a person.

Heating features

How to turn on the air conditioner for heating is described above. The air temperature situation is similar to the cooling mode, but there are differences. As the room heats up, humidity decreases and breathing becomes more difficult. Humidity ratio should be around 75%.

When lowered, the air dries up and gets too hot. It also adversely affects the state of health, especially if the split system is installed in an office where there are a large number of people.

See also  How to enable the function to the iPhone Locator

The heating mode on the air conditioner should turn on at the right time.

It is worth knowing that if the environment is above 30 degrees, then it is not recommended to use heating. This will adversely affect the device itself and the well-being of a person.

Remote control rules

The air conditioner is controlled using a special remote control (sometimes the buttons can be located on the device itself, but this is quite rare), which allows you to control the mechanism from a distance. It has a large number of buttons that perform the established functions. Touch panels can also be located, but this does not change the meaning of the keys.

Remote control can be carried out in two ways: using infrared radiation or fixed wiring. The scoreboard displays all the results of your actions, so you can immediately identify all the errors that may occur in the process of work. In this case, all breakdowns are accompanied by light or sound accompaniment.

How to turn on air conditioning? First you need to start the device. The key with this feature is located at the very top of the console (usually red or blue). Also presented the following commands (icons on the air conditioner’s console):

  • Mode: setting up the required modes. Here you can set the necessary cooling parameters, heating, drying, filtering. about each mode was said earlier (above you can read more about how to set up air conditioning on warm air or cold);
  • Swing: Changing the position of the shutters to regulate the air flow. Their position can change the flow of streams, which will allow you not only to adjust the temperature, but also the direction;
  • Direction: Changing the position of the shutters for regulating the air flow. This button you can change stream strength;
  • Fan: adjusting air flow power. There are several provisions depending on the equipment itself;
  • Turbo: Activate the most efficient mode of the device. In this mode, the maximum power of the flows is turned on;
  • Reset: reset the set parameters;
  • Lock: setting the lock to change the set parameters. Protects from interference by children who do not understand the controls and press the buttons without understanding;
  • Led: turn on the indicator light;
  • Clock: time regulation. The split system has not only a display showing the time, but also a timer that regulates the work.

How to set the air conditioner to warm air? detailed instructions

Air conditioning has long become an essential device for creating comfortable indoor conditions. It is with his help that people are saved on the hottest summer days. But a very small number of users know that this device can be used effectively and in winter. How to set the air conditioner to heat if it gets too cold in winter?

Operating temperatures

Most split systems have similar operational and technical characteristics. Almost all such devices function normally if the temperature is not higher than 25 degrees above zero and not lower than 5 degrees below zero. If the temperature is below the minimum threshold, the oil used for lubrication freezes, and the air conditioner stops working and may even break down. If the temperature is higher than the maximum value of 25 degrees, then the system is in danger of overheating, which can also disable it. It is important to consider these threshold values ​​when operating the device, you should also understand the principle of operation of the air conditioner.

Turning on the heating

Before adjusting the air conditioner to heating mode, you need to make sure that its operating temperature is in operation framework, otherwise the system may fail. Undoubtedly, different manufacturing companies (for example, LG, Samsung or General) produce largely different models, but still there is a certain universal model for turning on heating:

  • It is necessary to turn on the device (power button, signed as “On”).
  • Next, press the “Heat” button, which means “warmth”.
  • If this button is not present, there may be other options: “Mode”, or any other buttons, under / above which icons such as “sun”, “drop”, “fan”, “snow” are drawn. If none of these buttons is present, it means that the system is not capable of heating.
  • If the “Mode” button is present, you need to press it several times until the “sun” or the signature “Heat” is displayed.
  • Use the switch arrows or the “/-” buttons to set the desired temperature.

After carrying out this procedure, the fan will turn on, and after five (maximum ten) minutes, warm air is formed, heated to the temperature set by the user. Some remote control models can be configured differently. before setting up, it is recommended to read the instructions.

It is not always necessary to use the remote control to turn on the air conditioner for heating mode. Any split system has an external panel (sometimes hidden by a protective screen), the buttons of which duplicate the keys of the remote control. This is made for situations where the remote control is lost, broken or located far away. Using the panel, you can set the system to heating mode in the same way.

What to do if the heating does not turn on?

There are two main options: either the setting was made incorrectly, or there is a breakdown in the device itself. It is recommended to turn off the air conditioner and repeat all the steps again. If after ten minutes there is no heat from the device, there is a breakdown. The most common malfunction is the lack of freon necessary for the functioning of the heating system. In this situation, it is necessary to attribute air conditioning to repair, or cause qualified professionals home, especially if the device is warranty.

In addition, it is possible that the air conditioner is turned on at temperatures that are incompatible with its normal operation. It should be noted that some manufacturing companies produce additional modifications that expand the operating temperature range from.30 to 30 degrees Celsius.

Advantages and disadvantages of heating mode

Modern air conditioners perfectly heat any room. The heated air conditioner has a high efficiency (stands for “efficiency”, which allows you to create comfortable conditions in an apartment or house. However, it is not recommended to neglect the services of central heating.

The constant operation of the system is relatively harmful to the body, since heated air masses during prolonged circulation in a closed room harm the natural processes of thermoregulation, which can affect immunity.

Council that will be useful to everyone: how to get rid of the unpleasant smell in the air conditioner.

-instructions for turning on the air conditioner for heating mode

Recall that the air conditioner has a lot of modes (not only heating).

This video explains in detail and shows the method by which you can turn on the heating function on the air conditioner. The user, using his own example, describes in detail all the actions using the remote control, as well as the reaction of the system itself to turning on and changing certain parameters related to the heating mode (sound signals, visual. turning on the lights).

Why does the air conditioner not work for heating?

If the display shows information that the device is functioning normally, do not rush to panic. It takes up to 15 minutes to warm up the indoor unit. During this time after starting the device, the temperature in the room will start to rise

Another cause of failure could be a refrigerant leak. This happens as a result of bad unblock tubes. Call the service department who will fix the problem and top up the refrigerant.

After installing the air conditioner, clean the filters in time. If you ignore this requirement, then damage cannot be avoided. To pinpoint the source of the problem, you need to pay attention to the display screen, which displays the error code. The value can be found in the manual.

If 15 minutes after starting the system, the heating of the air has not started, try resetting the settings. To do this, read the instructions again on how to set up the air conditioner for warm air. Repeat all steps from the beginning. Then turn on the system again and check its operation after 15 minutes.

If the image of the sun or the inscription “NEAT” flashes intermittently, then most likely the battery should be replaced. Sometimes just taking them out and putting them back in is enough

The reason for the absence of heating can not serve as sufficient amount of freon. In this case, please contact the service department.

| Denial of responsibility | Contacts |RSS