How to set up the Internet in chinese iPhone

Internet settings for chinese phone

Configure Internet connection on your Chinese phone will help the existing universal instruction, which explains the principle of configuring the Internet. Usually, the Internet configuration on Chinese phones does not contain difficulties or difficulties and is performed by analogy with the configuration of European phones. Important moment. Setup can only be performed if there is an inserted SIM card. To start configuration, you must create an account. This can be done in the “Internet” menu (through “services”, “Network”). Section names can be changed depending on the model of your phone, but the basic setting principle remains the same. After that, you need to find the “Data Account”, as a rule, in this paragraph there are 3 more subparagraphs: GSM, GPRS and WLAN data. In our case, the configuration of the Internet connection will be executed in paragraph 2. GPRS. The rest of the sections do not touch.

Configuring Internet Connections On Chinese Phone begins with a long list of available “accounts”, from which you need to choose the most upper. In various models, the name of the account may differ, but usually it is TWN GPRS, SHT GPRS. To further configure, select the Edit command. If such a command is inaccessible, then the setup is performed using the creation of a new account. In any case, the configuration is executed by editing an account.

To configure the GPRS Internet connection from the Beeline operator, you must perform the following:

Make sure your operator provides such a service and it is connected with you

Go to the following menu sections = services = profiles = GPRS (you must either create a new profile or change the existing)

Set the following parameters of your profile:

Configure the browser for what you need to go to the following menu sections = Services = Internet = Settings = Profile Editing

Set the following parameters of your profile:

Home: Home page convenient for you (any)

Profile: Specify previously created Beeline Inet

Communication type: HTTP (Leave the address unchanged, I set the port 8080 or 9210)

To configure the GPRS Internet connection from the MTS operator, you must perform the following:

Make sure your operator provides such a service and it is connected with you

Go to the following menu sections = services = profiles = GPRS (you must either create a new profile or change the existing)

Set the following parameters of your profile:

Configure the browser for what you need to go to the following menu sections = Services = Internet = Settings = Profile Editing

Set the following parameters of your profile:

Home: Home page convenient for you (any)

Profile: specify previously created MTS inet

Communication type: HTTP (Leave the address unchanged. 000.000.000.000, install port 9201 or 8080)

To configure the GPRS Internet connection from the megaphone operator, you must perform the following:

Make sure your operator provides such a service and it is connected with you

Go to the following menu sections = services = profiles = GPRS (you must either create a new profile or change the existing)

Set the following parameters of your profile:

Configure the browser for what you need to go to the following menu sections = Services = Internet = Settings = Profile Editing

Set the following parameters of your profile:

Home: Home page convenient for you (any)

Profile: Specify previously created Megafon Inet

Communication type: HTTP (Leave the address unchanged. 000.000.000.000, install port 9201 or 8080)

In case the connection is not possible, it is possible that your phone simply does not support the HTTP protocol, then you must use WAP protocol to connect.

In the first line, called the “Account Name” you need to make the name of your mobile operator, in fact, which will be configured and connecting to the Internet. These options may be: MTS GPRS, Beeline GPRS, Megafon GPRS. After that, go to the second line where you specify the Internet.MTS.RU (for MTS), Internet (for MegaFon) or Internet.Beeline.RU (for Beeline). Then in the third line “Username” introduce MTS (for MTS), GDATA (for MegaFon) or Beeline (for Beeline).

Setting up MMS messages for chinese phones

For various cellular operators, MMS setting is also different.

To configure the connection, we enter the following menu sections = services = profiles

After that, you can either change the existing profile or create a new one with the following parameters:

To configure the MMS profile, select the following menu sections = Messages = MMS = Purpose (Setup) = Edit Profile = Profile 1

and perform profile editing with the following parameters:

Profile: We indicate the previously created Beeline MMS

Communication type: HTTP (set the address Next: 192.168.094.032, indicate the port: 9201 or 8080)

To configure the connection, we enter the following menu sections = services = profiles

After that, you can either change the existing profile or create a new one with the following parameters:

To configure the MMS profile, select the following menu sections = Messages = MMS = Purpose (Setup) = Edit Profile = Profile 1

and perform profile editing with the following parameters:

Profile: Indicate the previously created MTS MMS

Communication type: HTTP (set the address Next: 192.168.192.192, pointing port: 9201 or 8080)

If you do not work, you can try the following:

To configure the connection, we enter the following menu sections = services = profiles

See also  How to make an increase in iPhone

After that, you can either change the existing profile or create a new one with the following parameters:

To configure the MMS profile, select the following menu sections = Messages = MMS = Purpose (Setup) = Edit Profile = Profile 1

The answer to the post “I did not call you or attempt to reset the call when I accidentally clicked on the challenge!

I’m sitting in the evening, I do not touch anyone, I reproduce the primus, I wait for a courier.

After half an hour I remember that you need to gain a colleague from work, which called shortly before. I open the “recent”, I poke into the number of colleagues, I scream, I get into an unfamiliar room above, I see that I was mistaken, I immediately discard. A second part.

I am gaining a colleague, discuss the project, comes from an unfamiliar number, discard. I finish the conversation, I remember that I am waiting for a courier and about the call, I go to the “recent” clause on the last incoming.

-. BUT. Sorry. It’s I like you accidentally scored, my room also stayed in the last.

Cleaner incoming. Courier comes, I take the order.

An hour later, the call from an unfamiliar, but already some suspiciously familiar number.

What you should know about the Internet on the iPhone

Some other features of network access should be known:

  • Better to use unlimited tariff for the Internet. Thus, you will save your connection costs, while having a certain amount of MB for use within 30 days.
  • If you have a low battery charge, the Internet may not work. In this case, charge the mobile phone, after which again try to access the network.
  • If you are heading to another region or country, connect a special rate to be able to enter the network without spending on it large amounts.

Real Mobile Expert! He writes useful articles and instructions for mobile themes by simple and understandable language, gives the right and left the most most. Watching the section “Articles and Lifehaki”.

Creating a profile

Before entering the Internet from a Chinese phone, you need to create a profile. Go again in “Services” (or “Network”). The following actions:

  • Find and press “Settings” (“Parameters”);
  • Specify the SIM card with which you are going to connect to the Internet (gadgets from China allow you to go to the network with each of the several cards installed in them). SIM1 or SIM2;
  • go to “profiles” and change any of those that there or create a new one as an account;
  • Name. by name of the operator: Beeline, Megaphone or MTS;
  • “Homepage”. install any;
  • Choose from the list of the account that has already been created earlier;
  • Connection type: Usually http (if this gadget with HTTP does not work, select WAP);
  • “Proxy address” Leave unchanged, that is, zeros, and in the “proxy port” it is necessary to 8080 or 9201. In case of failure, specify the address of the proxy from the operator;
  • Save all, exit menu and restart the phone.

Real Mobile Expert! He writes useful articles and instructions for mobile themes by simple and understandable language, gives the right and left the most most. Watching the section “Articles and Lifehaki”.

How to set up the Internet on the phone? Many many are given by this issue. In this article, let’s try to give a clear answer.

So, detailed instructions for configuring the Internet in Chinese phones.

To configure the Internet connection, you must perform the following steps:

Make sure that such a service is connected (there is a GPRS service in your tariff).

Menu = Services = Internet = Settings = Edit Profile

Homepage: Anyone (for example: http: // yandex.RU)

Profile: Beeline Inet (previously created)

Communication type: HTTP (address leave unchanged; port: 8080 (or 9210))

If you did not work, perhaps your model does not support the HTTP protocol.

To configure the Internet connection, MTS users need to perform the following steps:

Make sure that such a service is connected (there is a GPRS service in your tariff).

Menu = Services = Internet = Settings = Edit Profile

Homepage: Anyone (for example: http: // yandex.RU)

Profile: MTS Inet (previously created)

Communication type: HTTP (Address Leave unchanged, t.E. 000.000.000.000);

If you did not succeed, you may not support the HTTP protocol.

To configure the Internet connection, megaphone users must perform the following steps:

Make sure that such a service is connected (there is a GPRS service in your tariff).

You can change the existing or create a new profile

Menu = Services = Internet = Settings = Edit Profile

Homepage: Anyone (for example: http: // yandex.RU)

Profile: Megafon Inet (previously created)

Communication type: HTTP (Address Leave unchanged, t.E. 000.000.000.000); Port: 8080 (or 9201))

If you did not succeed, you may not support the HTTP protocol.

Online store Kitajchik.Ru wishes you a pleasant shopping and fast internet.

internet, chinese, iphone

Kitmobi.Ru

The most elementary settings that everyone should know who acquired the Chinese phone.

Increasing the volume of the Chinese phone through the engineering menu

To increase the volume in the Chinese phone you need to go to the engineering menu. To enter the engineering menu, you should dial a combination:

# (# or # or #)

Below is a list of all other known codes for entering the engineering menu:

Select the section “Audio”, “Normal Mode” and instead of the item “Speech” Select the item “Microphone”

The list “Level 0” opens, “Level 1”. “Level 6”.

In each point, exhibit the values ​​of 187 192. You can set great importance, but it can lead to noise, ehu, whistle and t.D.

See also  What are the badges on the phone Huawei

Click “OK”. Then “Back” and again “Back”. The phone will offer update the values, click the “OK” button. Then we leave the engineering menu by clicking the “Fub” button and reboot the phone.

Do not touch the settings of the engineering menu other than those considered in this article!

Reset all settings from a Chinese phone

Most often, the following combinations of the factory reset code are used to reset the settings for “by default”:

1122, 1234, 0000, 0123, 2233, 3344

Chinese phone. how to set up a TV

Before starting, you must pull out the built-in antenna.

Go to the menu. TV. Options. Setting area. Choosing “Russia”.

Now that the Chinese phone is configured to receive Russian ether, set up channels.

Go to the menu. TV. Autopoysk. The phone will automatically exhibit all available channels.

internet, chinese, iphone

In Chinese phones analog television, so the number of channels and image quality depends only on the quality of the received signal.

Chinese phone. Internet Application Settings: Opera, ICQ, QIP, Jimm, Skype

In the main menu, choose “Entertainment and Games”.

We find the desired application and press the “Options” button

Profile Mode. Custom Settings.

Java’s profile for SIM1. Here you choose the configured Internet profile

If you want to install a profile for the second SIM card.

Phone Synchronization with PC. Transferring data from a computer to chinese phone

Connect the phone to a computer using Data. cable. After connecting, a list of actions appears on the phone screen, select the top line “storage device” (the name may be different, but it is always at the very top of the list). On the computer monitor screen, the operating system will display a new device detection. Removable Disc. The window with the list of the proposed actions will also be displayed. Select “View files and folders”.

Move the files you need to the appropriate folder. For example, games to the Games folder, music in My Music, video to the video folder and so on.

Wi-Fi in chinese phone

Open the main menu, select the “Services” section, find the “Data Account” there. “WLAN”. “Turn on”. “Network Search”. We find the access point you need and choose it. Enter password access. If everything went well and we connected to the network, the indicator on the phone flashes blue.

Now you need to configure the phone for that it enjoyed the found new access point, connecting to the Internet. In the menu, select “Services”, then “WAP”. “Settings”. “Profiles”, choose SIM1 / SIM2, “WLAN”, activate the profile. Now you can go online (menu. Services. WAP and recruit the site address)

When using Opera Mini, do not forget to change the settings of the application, as described earlier. In the profile of Java, you need to choose WLAN.

MMS setting on chinese phone

MMS settings for Chinese telephones Beeline operators, megaphone, Tele2 and MTS.

internet, chinese, iphone

1) in the menu. “Services”, “Data Account”, “GPRS”.

2) Select any account and edit it, select the desired operator and prescribe all values ​​as in the table below:

account name Tele2 MMS account name MTS MMS
APN MMS.Tele2.Ru APN MMS.MTS.Ru
Username Empty Username MTS
Password Empty Password MTS
Type of identification normal Type of identification normal
account name Beeline MMS account name Megafon MMS
APN Beeline.MTS.Ru APN MMS
Username Beeline Username MMS
Password Beeline Password MMS
Type of identification normal Type of identification normal

3) in the menu. Messages, “MMS”, “MMS Settings”, “Server Profile”, “SIM1 / SIM2”. Create a new profile, choose the operator you need and prescribe all values ​​as in the table:

Profile name MMS Profile name MMS
Homepage MMSC.Tele2.Ru Homepage http: // mmsc /
Data Account Tele2 MMS Data Account MTS MMS
Connection type http Connection type http
Use proxy Yes Use proxy NO
Proxy address 193.12.40.65 Proxy address 000.000.000.000
Port 8080 Port 8080
Username Empty Username Empty
Password Empty Password Empty

Kitmobi.Ru

The most elementary settings that everyone should know who acquired the Chinese phone.

Increasing the volume of the Chinese phone through the engineering menu

To increase the volume in the Chinese phone you need to go to the engineering menu. To enter the engineering menu, you should dial a combination:

# (# or # or #)

Below is a list of all other known codes for entering the engineering menu:

Select the section “Audio”, “Normal Mode” and instead of the item “Speech” Select the item “Microphone”

The list “Level 0” opens, “Level 1”. “Level 6”.

In each point, exhibit the values ​​of 187 192. You can set great importance, but it can lead to noise, ehu, whistle and t.D.

Click “OK”. Then “Back” and again “Back”. The phone will offer update the values, click the “OK” button. Then we leave the engineering menu by clicking the “Fub” button and reboot the phone.

Do not touch the settings of the engineering menu other than those considered in this article!

Reset all settings from a Chinese phone

Most often, the following combinations of the factory reset code are used to reset the settings for “by default”:

1122, 1234, 0000, 0123, 2233, 3344

Chinese phone. how to set up a TV

Before starting, you must pull out the built-in antenna.

Go to the menu. TV. Options. Setting area. Choosing “Russia”.

Now that the Chinese phone is configured to receive Russian ether, set up channels.

Go to the menu. TV. Autopoysk. The phone will automatically exhibit all available channels.

See also  iPhone error attached device does not work

In Chinese phones analog television, so the number of channels and image quality depends only on the quality of the received signal.

Chinese phone. Internet Application Settings: Opera, ICQ, QIP, Jimm, Skype

In the main menu, choose “Entertainment and Games”.

We find the desired application and press the “Options” button

Profile Mode. Custom Settings.

Java’s profile for SIM1. Here you choose the configured Internet profile

If you want to install a profile for the second SIM card.

Phone Synchronization with PC. Transferring data from a computer to chinese phone

Connect the phone to a computer using Data. cable. After connecting, a list of actions appears on the phone screen, select the top line “storage device” (the name may be different, but it is always at the very top of the list). On the computer monitor screen, the operating system will display a new device detection. Removable Disc. The window with the list of the proposed actions will also be displayed. Select “View files and folders”.

Move the files you need to the appropriate folder. For example, games to the Games folder, music in My Music, video to the video folder and so on.

Wi-Fi in chinese phone

Open the main menu, select the “Services” section, find the “Data Account” there. “WLAN”. “Turn on”. “Network Search”. We find the access point you need and choose it. Enter password access. If everything went well and we connected to the network, the indicator on the phone flashes blue.

Now you need to configure the phone for that it enjoyed the found new access point, connecting to the Internet. In the menu, select “Services”, then “WAP”. “Settings”. “Profiles”, choose SIM1 / SIM2, “WLAN”, activate the profile. Now you can go online (menu. Services. WAP and recruit the site address)

When using Opera Mini, do not forget to change the settings of the application, as described earlier. In the profile of Java, you need to choose WLAN.

MMS setting on chinese phone

MMS settings for Chinese telephones Beeline operators, megaphone, Tele2 and MTS.

1) in the menu. “Services”, “Data Account”, “GPRS”.

2) Select any account and edit it, select the desired operator and prescribe all values ​​as in the table below:

account name Tele2 MMS account name MTS MMS
APN MMS.Tele2.Ru APN MMS.MTS.Ru
Username Empty Username MTS
Password Empty Password MTS
Type of identification normal Type of identification normal
account name Beeline MMS account name Megafon MMS
APN Beeline.MTS.Ru APN MMS
Username Beeline Username MMS
Password Beeline Password MMS
Type of identification normal Type of identification normal

3) in the menu. Messages, “MMS”, “MMS Settings”, “Server Profile”, “SIM1 / SIM2”. Create a new profile, choose the operator you need and prescribe all values ​​as in the table:

Profile name MMS Profile name MMS
Homepage MMSC.Tele2.Ru Homepage http: // mmsc /
Data Account Tele2 MMS Data Account MTS MMS
Connection type http Connection type http
Use proxy Yes Use proxy NO
Proxy address 193.12.40.65 Proxy address 000.000.000.000
Port 8080 Port 8080
Username Empty Username Empty
Password Empty Password Empty

Setup via Wi-Fi network

  • To do this, you need a Wi-Fi router and a computer with a Wi-Fi adapter. Initially, you need to create a Wi-Fi home network. To do this, enter the “Start” ? “Control Panel” ? “Network connections” ? “Create a new connection”.
  • From the list of proposed options, select “Create a Wireless Connection Computer-Computer”, set it the name and select a password. Press “Save Connection”.
  • Then turn on Wi-Fi adapter. When the wireless connections appears, you click on it, select the connection you just created and entered password.
  • Next are returned to “Network Connections” and select the appropriate (it can be “VPN connection” or “Connecting over the LAN”).
  • Click on it right mouse button, enter “Properties” ? “Common access” and put the first tick. Now the Internet applies to Wi-Fi connection.
  • In the MAC computer, the creation of a home network is carried out through “System Settings”.
  • The final step is to set up in the iPhone itself. In the phone go to “Settings” ? “Wi-Fi”. Include, select the created network and entered the password, which the device must remember automatically.
  • In theory, the device connects to this network every time it turns out in its area.

Real Mobile Expert! He writes useful articles and instructions for mobile themes by simple and understandable language, gives the right and left the most most. Watching the section “Articles and Lifehaki”.

It is important to know

The above-mentioned actions were performed correctly, but the Internet did not appear? The reasons for this may be different:

  • The number does not connect a service that provides access to the network. As a rule, it is provided in the basic package of any tariff. Mobile operator provides it by default. Function disappears due to an error in the personal account or random removal. Connect anew mobile Internet is not difficult: enough to contact the operator or contact the cellular salon.
  • Not enough funds on the SIM card. If the balance is negative, Internet access is blocked. And this concerns even cases when the term of unlimited continues. Solving the problem. replenish the bill.
  • Mobile traffic has been consumed. Best consult the operator. Perhaps you need another tariff plan.
| Denial of responsibility | Contacts |RSS